Introduction
Instrument PanelHigh/Low-Beam Headlamp
Connector Retaining Tab
Connector Release
Headlamp Bulb
To replace a headlamp bulb:
Open the hood. See Hood on page 10-5.
Remove the connector retaining tab (1).
Disconnect the wiring harness connector from the bulb (3) by pressing the
connector release (2) and pulling strai ...
Head Restraint Removal and Reinstallation
The rear outboard head restraints can be removed if they interfere with the proper
installation of the child restraint.
To remove the head restraint:
Partially fold the seatback forward. See Rear Seats on page 3-8 for additional
information.
Press both buttons on the head restrai ...
Jump Starting
For more information about the vehicle battery, see Battery on page 10-22.
If the battery has run down, try to use another vehicle and some jumper cables
to start your vehicle.
Be sure to use the following steps to do it safely.
Warning
WARNING: Battery posts, terminals, and related accessorie ...