Chevrolet Spark Owners Manual: Instruments and Controls
- Controls
- Steering Wheel Adjustment
- Steering Wheel Controls
- Windshield Wiper/Washer
- Rear Window Wiper/ Washer
- Clock
- Power Outlets
- Warning Lights, Gauges, and Indicators
- Speedometer
- Trip Odometer
- Tachometer
- Fuel Gauge
- Safety Belt Reminders
- Airbag Readiness Light
- Passenger Airbag Status Indicator
- Charging System Light
- Malfunction Indicator Lamp
- Service Vehicle Soon Light
- Brake System Warning Light
- Antilock Brake System (ABS) Warning Light
- Up-Shift Light
- Power Steering Warning Light
- Traction Off Light
- StabiliTrak® OFF Light
- Traction Control System (TCS)/StabiliTrak Light
- Engine Coolant Temperature Warning Light
- Tire Pressure Light
- Engine Oil Pressure Light
- Low Fuel Warning Light
- Immobilizer Light
- Reduced Engine Power Light
- High-Beam On Light
- Front Fog Lamp Light
- Cruise Control Light
- Information Displays
- Vehicle Messages
- Vehicle Personalization
Roof Rack System
Warning
If something is carried on top of the vehicle that is longer or
wider than the roof rack-like paneling, plywood, or a mattress-the wind can catch
it while the vehicle is being driven. The ...
Controls
...
Other materials:
StabiliTrak® OFF Light
This light comes on briefly while
starting the engine. If it does not, have the vehicle serviced by your dealer.
This light comes on when the StabiliTrak system is turned off.
If StabiliTrak is off, the Traction Control System (TCS) is also off.
If the StabiliTrak and TCS are off, the system do ...
Exterior Lighting
The exterior lamp control is on the turn signal lever on the left side of the
steering column.
There are four positions:
Turns on the headlamps together with
the parking lamps and instrument panel lights.
Turns on the parking lamps including
all lamps, except the headlamps.
Turns the ...
High/Low-Beam Headlamp
Connector Retaining Tab
Connector Release
Headlamp Bulb
To replace a headlamp bulb:
Open the hood. See Hood on page 10-5.
Remove the connector retaining tab (1).
Disconnect the wiring harness connector from the bulb (3) by pressing the
connector release (2) and pulling strai ...
