Chevrolet Spark Owners Manual: Traction Off Light
This light comes on briefly while
starting the engine. If it does not, have the vehicle serviced by your dealer. If
the system is working normally, the indicator light then turns off.
The traction off light comes on when the Traction Control System (TCS) has been turned off by pressing and releasing the TCS/StabiliTrak button.
This light and the StabiliTrak OFF light come on when StabiliTrak is turned off.
If the TCS is off, wheel spin is not limited. Adjust driving accordingly.
See Traction Control/Electronic Stability Control on page 9-27.
Power Steering Warning Light
This light comes on briefly when
the ignition is turned to ON/RUN as a check to show it is working.
If it does not come on have the vehicle serviced by your dealer.
If this light stays on, or com ...
StabiliTrak® OFF Light
This light comes on briefly while
starting the engine. If it does not, have the vehicle serviced by your dealer.
This light comes on when the StabiliTrak system is turned off.
If StabiliTrak is of ...
Other materials:
Tire Sealant and Compressor Kit
Warning
Idling a vehicle in an enclosed area with poor ventilation is
dangerous. Engine exhaust may enter the vehicle. Engine exhaust contains carbon
monoxide (CO) which cannot be seen or smelled.
It can cause unconsciousness and even death. Never run the engine in an enclosed
area that has ...
Driving on Snow or Ice
Drive carefully when there is snow or ice between the tires and the road, creating
less traction or grip.
Wet ice can occur at about 0°C (32° F) when freezing rain begins to fall, resulting
in even less traction. Avoid driving on wet ice or in freezing rain until roads
can be treated with sal ...
Replacing LATCH System Parts After a Crash
Warning
A crash can damage the LATCH system in the vehicle. A damaged
LATCH system may not properly secure the child restraint, resulting in serious injury
or even death in a crash. To help make sure the LATCH system is working properly
after a crash, see your dealer to have the system inspec ...