Chevrolet Spark Owners Manual: Rear Wiper Blade Replacement
- Pull the wiper arm (1) a short distance away from the glass.
- Push the blade (2) away from the arm (1).
- Once the blade pin disengages from the wiper arm, remove the wiper blade by sliding the blade off the arm.
- Reverse the steps to install the new blade.
Front Wiper Blade Replacement
Windshield wiper blades should be inspected for wear or cracking. See Maintenance
Schedule on page 11-3.
Replacement blades come in different types and are removed in different ways.
For proper w ...
Headlamp Aiming
Headlamp aim has been preset and should need no further adjustment.
If the vehicle is damaged in a crash, the headlamp aim may be affected.
If adjustment to the headlamps is necessary, see your deal ...
Other materials:
Malfunction Indicator Lamp
A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors
the operation of the vehicle to ensure emissions are at acceptable levels, helping
to maintain a clean environment. The malfunction indicator lamp comes on when the
vehicle is placed in ON/RUN, as a check to show ...
Turn and Lane-Change Signals
Move the lever all the way up or down to signal a turn.
An arrow on the instrument cluster flashes in the direction of the turn or lane
change.
Raise or lower the lever until the arrow starts to flash to signal a lane change.
Hold it there until the lane change is completed.
If the lever ...
Vehicle Personalization
Personalization Menu (Radio without Touchscreen)
The audio system controls and touchscreen are used to access the personalization
menus for customizing vehicle features.
The following are all possible personalization features. Depending on the vehicle,
some may not be available.
CONFIG (Confi ...
