Chevrolet Spark Owners Manual: Electrical System
- Electrical System Overload
- Fuses and Circuit Breakers
- Engine Compartment Fuse Block
- Instrument Panel Fuse Block
License Plate Lamp
Attachment Screws
License Plate Bulb
Bulb Socket
To replace a license plate lamp bulb:
Remove the two screws (1) from the license plate lamp assembly.
Turn and pull the license pla ...
Electrical System Overload
The vehicle has fuses and circuit breakers to protect against an electrical system
overload.
When the current electrical load is too heavy, the circuit breaker opens and
closes, protecting the ci ...
Other materials:
Fog Lamps
If equipped with fog lamps, they are controlled by the
band on the middle of the turn signal
lever.
To use the fog lamps, the ignition must be turned on and the low-beam headlamps
or parking lamps must be on.
Turn the band to to turn the fog
lamps on. The band automatically returns to ...
Rear Window Wiper/ Washer
If equipped with the rear wiper/ washer, the controls are on the end of the windshield
wiper lever.
Turn the rear wiper/washer band to operate the rear window wiper/ washer.
ON: Turns the rear wiper on for continuous wipes.
OFF: Turns the rear wiper off.
(Rear Washer): Sprays washer fluid ...
Liftgate
To lock or unlock the liftgate from the outside, use the key in the liftgate
lock.
If equipped, press on the RKE transmitter
to unlock all doors and press to lock.
See Remote Keyless Entry (RKE) System Operation on page 2-3.
Without RKE
With RKE
To lock or unlock the liftgate fro ...
