Battery Power Protection
IntroductionMalfunction Indicator Lamp
A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors
the operation of the vehicle to ensure emissions are at acceptable levels, helping
to maintain a clean environment. The malfunction indicator lamp comes on when the
vehicle is placed in ON/RUN, as a check to show ...
Cleaning High Gloss Surfaces and Vehicle Information and Radio Displays
For vehicles with high gloss surfaces or vehicle displays, use a microfiber cloth
to wipe surfaces.
Before wiping the surface with the microfiber cloth, use a soft bristle brush
to remove dirt that could scratch the surface. Then use the microfiber cloth by
gently rubbing to clean. Never use ...
Brake Fluid
The brake/clutch master cylinder
reservoir is filled with DOT 4 brake fluid as indicated on the reservoir cap. See
Engine Compartment Overview on page 10-7 for the location of the reservoir.
There are only two reasons why the brake fluid level in the reservoir might go
down:
The brake fl ...