Chevrolet Spark Owners Manual: Infotainment
Read the following pages to become familiar with these features.
Warning
Taking your eyes off the road for too long or too often while using any infotainment feature can cause a crash. You or others could be injured or killed. Do not give extended attention to infotainment tasks while driving.
Limit your glances at the vehicle displays and focus your attention on driving. Use voice commands whenever possible.
The infotainment system has built-in features intended to help avoid distraction by disabling some functions when driving. These functions may gray out when they are unavailable. Many infotainment features are also available through the instrument cluster and steering wheel controls.
Before driving:
- Become familiar with the operation, faceplate buttons, and screen buttons.
- Set up the audio by presetting favorite stations, setting the tone, and adjusting the speakers.
- Set up phone numbers in advance so they can be called easily by pressing a single button or by using a single voice command if equipped with Bluetooth phone capability.
See Defensive Driving on page 9-2 To play the infotainment system with the ignition off, see Retained Accessory Power (RAP) on page 9-18.
Introduction
...
Theft-Deterrent Feature
The infotainment system has an electronic security system installed to prevent
theft.
The infotainment system only works in the vehicle in which it was first installed,
and cannot be used in anot ...
Other materials:
Electrical System Overload
The vehicle has fuses and circuit breakers to protect against an electrical system
overload.
When the current electrical load is too heavy, the circuit breaker opens and
closes, protecting the circuit until the current load returns to normal or the problem
is fixed. This greatly reduces the c ...
Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
Stoplamp/Taillamp
Turn Signal Lamp/Taillamp
Back-up Lamp
To replace a taillamp, turn signal lamp, stoplamp, or back-up bulb:
Open the liftgate. See Liftgate on page 2-8.
Remove the two screws and the lamp assembly.
Turn the bulb socket counterclockwise and remove the so ...
Managing the Vehicle Damage Repair Process
In the event that the vehicle requires damage repairs, GM recommends that you
take an active role in its repair. If you have a pre-determined repair facility
of choice, take the vehicle there, or have it towed there.
Specify to the facility that any required replacement collision parts be origi ...