Chevrolet Spark Owners Manual: Driving for Better Fuel Economy
Driving habits can affect fuel mileage. Here are some driving tips to get the best fuel economy possible.
- Avoid fast starts and accelerate smoothly.
- Brake gradually and avoid abrupt stops.
- Avoid idling the engine for long periods of time.
- When road and weather conditions are appropriate, use cruise control.
- Always follow posted speed limits or drive more slowly when conditions require.
- Keep vehicle tires properly inflated.
- Combine several trips into a single trip.
- Replace the vehicle's tires with the same TPC Spec number molded into the tire's sidewall near the size.
- Follow recommended scheduled maintenance.
Engine Oil Life System
The engine oil life system calculates engine oil life based on vehicle use and
displays %CHANGE DIC message when it
is necessary to change the engine oil and filter.
The oil life system should b ...
Roadside Assistance Program
U.S.: 1-800-243-8872 TTY Users (U.S. Only): 1-888-889-2438
Canada: 1-800-268-6800
As the owner of a new Chevrolet, you are automatically enrolled in the Roadside
Assistance program.
See Roadside ...
Other materials:
Towing the Vehicle
Caution
Incorrectly towing a disabled vehicle may cause damage. The damage
would not be covered by the vehicle warranty.
Have the vehicle towed on a flatbed car carrier or a wheel lift tow truck.
If a wheel lift tow truck is used, the drive wheels cannot contact the road while
the vehicle is ...
Ride Control Systems
Traction Control/Electronic Stability Control
System Operation
The vehicle has a Traction Control System (TCS) and StabiliTrak®, an electronic
stability control system.
These systems help limit wheel slip and assist the driver in maintaining control,
especially on slippery road conditions.
T ...
High/Low-Beam Headlamp
Connector Retaining Tab
Connector Release
Headlamp Bulb
To replace a headlamp bulb:
Open the hood. See Hood on page 10-5.
Remove the connector retaining tab (1).
Disconnect the wiring harness connector from the bulb (3) by pressing the
connector release (2) and pulling strai ...
