Chevrolet Spark manuals

Chevrolet Spark Owners Manual: Exit Lighting

If the dome lamps are in the DOOR position, they come on automatically when the key is removed from the ignition. The exterior lamps and dome lamps remain on after the door is closed for a set amount of time, then automatically turn off.

The headlamps, parking lamps, and back-up lamps will turn on for a set amount of time when the vehicle is turned off and the key is removed from the ignition, then automatically turn off.

This feature can be changed. See Vehicle Personalization on page 5-27.

Entry Lighting
The headlamps, parking lamps, taillamps, and the interior lights turn on briefly at night when the Remote Keyless Entry (RKE) transmitter is pressed. The lights turn off immediately when the ign ...

Battery Power Protection
The battery saver feature is designed to protect the vehicle's battery. If some interior lamps and/or headlamps are left on and the ignition is turned off, the battery rundown protection system ...

Other materials:

High/Low-Beam Headlamp
Connector Retaining Tab Connector Release Headlamp Bulb To replace a headlamp bulb: Open the hood. See Hood on page 10-5. Remove the connector retaining tab (1). Disconnect the wiring harness connector from the bulb (3) by pressing the connector release (2) and pulling strai ...

License Plate Lamp
Attachment Screws License Plate Bulb Bulb Socket To replace a license plate lamp bulb: Remove the two screws (1) from the license plate lamp assembly. Turn and pull the license plate lamp assembly down. Turn the bulb socket (3) counterclockwise and pull it out of the lamp assem ...

Doing Your Own Service Work
Warning It can be dangerous to work on your vehicle if you do not have the proper knowledge, service manual, tools, or parts. Always follow owner manual procedures and consult the service manual for your vehicle before doing any service work. If doing some of your own service work, use the p ...

© 2016-2026 Copyright www.chevspark.net