For the proper type of replacement bulbs, see Replacement Bulbs on page 10-29.
For any bulb- changing procedure not listed in this section, contact your dealer.
Headlamp Aiming
Halogen BulbsHigh/Low-Beam Headlamp
Connector Retaining Tab
Connector Release
Headlamp Bulb
To replace a headlamp bulb:
Open the hood. See Hood on page 10-5.
Remove the connector retaining tab (1).
Disconnect the wiring harness connector from the bulb (3) by pressing the
connector release (2) and pulling strai ...
Adding Equipment to the Airbag-Equipped Vehicle
Adding accessories that change the vehicle's frame, bumper system, height, front
end, or side sheet metal may keep the airbag system from working properly. The operation
of the airbag system can also be affected by changing any parts of the front seats,
safety belts, the airbag sensing and ...
Hazard Warning Flashers
The hazard warning flasher button is on the center stack.
(Hazard Warning Flasher): Press
to make the front and rear turn signal lamps flash on and off.
This warns others that you are having trouble. Press the button again to turn
the flashers off.
When the hazard warning flashers are on, ...