Chevrolet Spark Owners Manual: Traction Control/Electronic Stability Control
The TCS limits wheel spin. The system is on when the vehicle is started.
The StabiliTrak system assists with directional control of the vehicle in difficult driving conditions. The system is on when the vehicle is started.
- To turn off traction control, press and release the TCS/StabiliTrak button
on the center stack.
illuminates in the instrument cluster. - To turn off both traction control and StabiliTrak, press and hold the TCS/StabiliTrak
button
on the center
stack, until
and
illuminate in the instrument cluster. - Press the TCS/StabiliTrak button
again to turn on both systems.
and
go off in the instrument cluster.
See Traction Control/Electronic Stability Control on page 9-27.
Tire Pressure Monitor
This vehicle may have a Tire Pressure Monitor System (TPMS).
The low tire pressure warning light
alerts to a significant loss in pressure of one of the vehicle's tires. If the warning
light c ...
Other materials:
Brake Assist
The Brake Assist feature is designed to assist the driver in stopping or decreasing
vehicle speed in emergency driving conditions. This feature uses the stability system
hydraulic brake control module to supplement the power brake system under conditions
where the driver has quickly and forcef ...
Antilock Brake System (ABS)
This vehicle has ABS, an advanced electronic braking system that helps prevent
a braking skid.
When the vehicle begins to drive away, ABS checks itself.
A momentary motor or clicking noise might be heard while this test is going on,
and it might even be noticed that the brake pedal moves a lit ...
Hazard Warning Flashers
The hazard warning flasher button is on the center stack.
(Hazard Warning Flasher): Press
to make the front and rear turn signal lamps flash on and off.
This warns others that you are having trouble. Press the button again to turn
the flashers off.
When the hazard warning flashers are on, ...
