Chevrolet Spark Owners Manual: Passenger Sensing System
United States
Canada
The passenger sensing system turns off the front outboard passenger frontal airbag and knee airbag under certain conditions. No other airbag is affected by the passenger sensing system. See Passenger Sensing System on page 3-25 for important information.
The passenger airbag status indicator will be visible on the center display when the vehicle is started.
See Passenger Airbag Status Indicator on page 5-11.
Safety Belts
Refer to the following sections for important information on how to use safety
belts properly.
Safety Belts on page 3-10.
How to Wear Safety Belts Properly on page 3-12.
Lap-Shoulder Bel ...
Mirror Adjustment
Exterior Mirrors
Manual Outside Mirrors
If equipped, move the control up, down, or side to side to adjust the mirror.
See Manual Mirrors on page 2-13.
Power Outside Mirrors
If equipped ...
Other materials:
Ignition Positions
The ignition switch has four different positions.
The uplevel key must be fully extended to start the vehicle.
To shift out of P (Park), the ignition must be in ON/RUN and the regular brake
pedal applied.
1 (STOPPING THE ENGINE/LOCK/ OFF): When the vehicle is stopped, turn the ignition
sw ...
Connecting a USB Storage Device or iPod/iPhone
To connect a USB storage device, connect the device to the USB port.
To connect an iPod/iPhone, connect one end of the device’s cable to the iPod/iPhone
and the other end to the USB port.
The iPod/iPhone charges while it is connected to the vehicle if the vehicle is
in ACC/ACCESSORY, ON/RUN. S ...
Malfunction Indicator Lamp
A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors
the operation of the vehicle to ensure emissions are at acceptable levels, helping
to maintain a clean environment. The malfunction indicator lamp comes on when the
vehicle is placed in ON/RUN, as a check to show ...
