Chevrolet Spark Owners Manual: Keys

Chevrolet Spark Owners Manual / Keys, Doors, and Windows / Keys and Locks / Keys

Warning

Leaving children in a vehicle with the ignition key is dangerous and children or others could be seriously injured or killed. They could operate the power windows or other controls or make the vehicle move. The windows will function with the keys in the ignition, and children or others could be caught in the path of a closing window. Do not leave children in a vehicle with the ignition key.

Chevrolet Spark. Keys

Chevrolet Spark. Base Level Key
Base Level Key

Chevrolet Spark. Uplevel Key
Uplevel Key

The key that is part of the Remote Keyless Entry (RKE) transmitter can be used for the ignition and all locks.

Press the key release button on the RKE transmitter to extend the key.

Press the button and the key blade to retract the key.

See your dealer if a new key is needed.

If it becomes difficult to turn the key, inspect the key blade for debris.

Periodically clean with a brush or pick.

If you are locked out of the vehicle, see Roadside Assistance Program on page 13-5.

With an active OnStar subscription, an OnStar Advisor may remotely unlock the vehicle. See OnStar Overview on page 14-1.

Keys and Locks

...

Remote Keyless Entry (RKE) System

See Radio Frequency Statement on page 13-12. If there is a decrease in the RKE operating range: Check the distance. The transmitter may be too far from the vehicle. Check the location. Other ve ...

Other materials:

Hood
To open the hood: Pull the hood release handle inside the vehicle. It is on the lower left side of the instrument panel. Go to the front of the vehicle and push the secondary hood release lever up. Lift the hood and release the hood prop from the prop retainer, w ...

Securing Child Restraints (Rear Seat)
When securing a child restraint in a rear seating position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. If the child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH System) on page 3-40 for how and ...

License Plate Lamp
Attachment Screws License Plate Bulb Bulb Socket To replace a license plate lamp bulb: Remove the two screws (1) from the license plate lamp assembly. Turn and pull the license plate lamp assembly down. Turn the bulb socket (3) counterclockwise and pull it out of the lamp assem ...