Chevrolet Spark Owners Manual: Replacing Safety Belt System Parts after a Crash
Warning
A crash can damage the safety belt system in the vehicle.
A damaged safety belt system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure the safety belt systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.
After a minor crash, replacement of safety belts may not be necessary.
But the safety belt assemblies that were used during any crash may have been stressed or damaged.
See your dealer to have the safety belt assemblies inspected or replaced.
New parts and repairs may be necessary even if the safety belt system was not being used at the time of the crash.
Have the safety belt pretensioners, if equipped, checked if the vehicle has been in a crash, or if the airbag readiness light stays on after you start the vehicle or while you are driving. See Airbag Readiness Light on page 5-11.
Safety Belt Care
Keep belts clean and dry.
Warning
Do not bleach or dye safety belts.
It may severely weaken them. In a crash, they might not be able to provide adequate
protection.
Clean safety belts only with ...
Airbag System
The vehicle has the following airbags:
A frontal airbag for the driver.
A frontal airbag for the front outboard passenger.
A knee airbag for the driver.
A knee airbag for the front outboard ...
Other materials:
Driving on Wet Roads
Rain and wet roads can reduce vehicle traction and affect your ability to stop
and accelerate.
Always drive slower in these types of driving conditions and avoid driving through
large puddles and deep-standing or flowing water.
Warning
Wet brakes can cause crashes.
They might not work as wel ...
Recommended Fluids, Lubricants, and Parts
Recommended Fluids and Lubricants
Fluids and lubricants identified below by name, part number, or specification
can be obtained from your dealer.
Usage
Fluid/Lubricant
Engine Oil
Use only engine oil meeting the dexos1™ specification of the proper
SAE viscosity grade. L ...
Windshield Wiper/Washer
The windshield wiper/washer lever is on the right side of the steering column.
Move the lever to one of the following positions: HI: Use for fast wipes.
LO: Use for slow wipes.
INT (Intermittent Wipes): Move the lever up to INT for intermittent wipes, then
turn the INT band up for more ...
