Push the tab forward for daytime use and pull it rearward for nighttime use to avoid glare of the headlamps from behind.
Interior Rearview Mirrors
WindowsAutomatic Door Locks
If equipped, the vehicle is programmed so that when the doors are closed, the
ignition is on, and the shift lever is moved out of P (Park) for automatic transmissions,
or the vehicle speed is above 13 km/h (8 mph) for manual transmissions, the doors
and the liftgate will lock.
To unlock the d ...
Doing Your Own Service Work
Warning
It can be dangerous to work on your vehicle if you do not have
the proper knowledge, service manual, tools, or parts. Always follow owner manual
procedures and consult the service manual for your vehicle before doing any service
work.
If doing some of your own service work, use the p ...
High/Low-Beam Headlamp
Connector Retaining Tab
Connector Release
Headlamp Bulb
To replace a headlamp bulb:
Open the hood. See Hood on page 10-5.
Remove the connector retaining tab (1).
Disconnect the wiring harness connector from the bulb (3) by pressing the
connector release (2) and pulling strai ...