In a deployment event, the sensing system sends an electrical signal triggering a release of gas from the inflator. Gas from the inflator fills the airbag causing the bag to break out of the cover. The inflator, the airbag, and related hardware are all part of the airbag module.
For airbag locations, see Where Are the Airbags? on page 3-21.
When Should an Airbag Inflate?
How Does an Airbag Restrain?High/Low-Beam Headlamp
Connector Retaining Tab
Connector Release
Headlamp Bulb
To replace a headlamp bulb:
Open the hood. See Hood on page 10-5.
Remove the connector retaining tab (1).
Disconnect the wiring harness connector from the bulb (3) by pressing the
connector release (2) and pulling strai ...
Using the USB Port
The infotainment system can play music or movies by connecting an auxiliary device
to the USB port.
USB Support
If equipped, the USB connector is in the center stack, and uses the USB 2.0 standard.
USB Supported Devices
USB Flash Drives
Portable USB Hard Drives
2G–5G iPod nano®
1G–3G ...
Dinghy Towing (with Manual Transmission)
To dinghy tow the vehicle from the front with all four wheels on the ground:
Position the vehicle to tow and then secure it to the towing vehicle.
Shift the transmission to Neutral.
Turn the ignition to ACC/ ACCESSORY.
Caution
If 113 km/h (70 mph) is exceeded while towing the vehicle ...