Chevrolet Spark Owners Manual: Storing the Tire Sealant and Compressor Kit
The tire sealant and compressor kit is located in the rear storage area.
- Lift the trim cover.
- Remove the tire sealant canister (1) and the compressor (2).
To store the tire sealant and compressor kit, reverse the steps.
Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire
(Not Punctured)
The kit includes:
Sealant Canister Inlet Valve
Sealant/Air Hose
Base of Sealant Canister
Tire Sealant Canister
On/Off Button
Slot on Top of Compressor
Pressure Gauge
Pressur ...
Jump Starting
For more information about the vehicle battery, see Battery on page 10-22.
If the battery has run down, try to use another vehicle and some jumper cables
to start your vehicle.
Be sure to use the ...
Other materials:
Traction Control/Electronic Stability Control
The TCS limits wheel spin. The system is on when the vehicle is started.
The StabiliTrak system assists with directional control of the vehicle in difficult
driving conditions. The system is on when the vehicle is started.
To turn off traction control, press and release the TCS/StabiliTrak bu ...
Using the USB Port
The infotainment system can play music or movies by connecting an auxiliary device
to the USB port.
USB Support
If equipped, the USB connector is in the center stack, and uses the USB 2.0 standard.
USB Supported Devices
USB Flash Drives
Portable USB Hard Drives
2G–5G iPod nano®
1G–3G ...
Tire Pressure Monitor System
The Tire Pressure Monitor System (TPMS) uses radio and sensor technology to check
tire pressure levels. The TPMS sensors monitor the air pressure in your tires and
transmit tire pressure readings to a receiver located in the vehicle.
Each tire, including the spare (if provided), should be check ...
