Chevrolet Spark Owners Manual: Starting and Operating
- New Vehicle Break-In
- Ignition Positions
- Starting the Engine
- Engine Heater
- Retained Accessory Power (RAP)
- Shifting Into Park
- Shifting out of Park
- Parking
Vehicle Load Limits
It is very important to know how much weight the vehicle can carry. This weight
is called the vehicle capacity weight and includes the weight of all occupants,
cargo, and all nonfactory-installed ...
New Vehicle Break-In
Caution
The vehicle does not need an elaborate break-in. But it will perform
better in the long run if you follow these guidelines:
Do not drive at any one constant speed, fast or slow, for
...
Other materials:
Top Tether Anchor
A top tether (3, 4) anchors the top of the child restraint to the vehicle.
A top tether anchor is built into the vehicle. The top tether attachment (2)
on the child restraint connects to the top tether anchor in the vehicle in order
to reduce the forward movement and rotation of the child r ...
Instrument Panel, Leather, Vinyl, Other Plastic Surfaces, Low Gloss Paint Surfaces
and Natural Open Pore Wood Surfaces
Use a soft microfiber cloth dampened with water to remove dust and loose dirt.
For a more thorough cleaning, use a soft microfiber cloth dampened with a mild soap
solution.
Caution
Soaking or saturating leather, especially perforated leather,
as well as other interior surfaces, may cause per ...
Brake Fluid
The brake/clutch master cylinder
reservoir is filled with DOT 4 brake fluid as indicated on the reservoir cap. See
Engine Compartment Overview on page 10-7 for the location of the reservoir.
There are only two reasons why the brake fluid level in the reservoir might go
down:
The brake fl ...
