Chevrolet Spark Owners Manual: Seats and Restraints
- Head Restraints
- Front Seats
- Rear Seats
- Safety Belts
- How to Wear Safety Belts Properly
- Lap-Shoulder Belt
- Safety Belt Use During Pregnancy
- Safety Belt Extender
- Safety System Check
- Safety Belt Care
- Replacing Safety Belt System Parts after a Crash
- Airbag System
- Where Are the Airbags?
- When Should an Airbag Inflate?
- What Makes an Airbag Inflate?
- How Does an Airbag Restrain?
- What Will You See after an Airbag Inflates?
- Passenger Sensing System
- Servicing the Airbag-Equipped Vehicle
- Adding Equipment to the Airbag-Equipped Vehicle
- Airbag System Check
- Replacing Airbag System Parts after a Crash
- Child Restraints
Sun Visors
Pull the sun visor down to block out glare. Detach the sun visor from the center
mount and swing it to the side.
Visor Vanity Mirror
The vehicle may have vanity mirrors and card holders on the bac ...
Head Restraints
Warning
With head restraints that are not installed and adjusted properly,
there is a greater chance that occupants will suffer a neck/ spinal injury in a
crash. Do not drive until the head restr ...
Other materials:
Front Wiper Blade Replacement
Windshield wiper blades should be inspected for wear or cracking. See Maintenance
Schedule on page 11-3.
Replacement blades come in different types and are removed in different ways.
For proper windshield wiper blade length and type, see Maintenance Replacement Parts
on page 11-13.
Caution
...
Remote Keyless Entry (RKE) System
For vehicles with the RKE transmitter, it may work up to 60m (195 ft) away from
the vehicle.
Press the key release button to extend the key blade. The key can be used for
the ignition and all locks.
Press to unlock the driver door
or all doors and the liftgate.
Press to lock all doors ...
Remote Keyless Entry (RKE) System
See Radio Frequency Statement on page 13-12.
If there is a decrease in the RKE operating range:
Check the distance. The transmitter may be too far from the vehicle.
Check the location. Other vehicles or objects may be blocking the signal.
Check the transmitter's battery.
See “Battery ...
