Recommended Fluids and Lubricants
Fluids and lubricants identified below by name, part number, or specification can be obtained from your dealer.
Usage | Fluid/Lubricant |
Engine Oil | Use only engine oil meeting the dexos1™ specification of the proper SAE viscosity grade. Look for the dexos1 approved logo for GM approved engine oil. See Engine Oil on page 10-8. |
Engine Coolant | 50/50 mixture of clean, drinkable water and use only DEX-COOL® Coolant.
See Engine Coolant on page 10-14. |
Hydraulic Brake/Clutch System | DOT 4 Hydraulic Brake Fluid (GM Part No. 19299570, in Canada 19299571). |
Windshield Washer | Automotive windshield washer fluid that meets regional freeze protection requirements. |
Automatic Transmission | ACDelco CVT Fluid (Part No. 19260800, in Canada 19299096). |
Manual Transmission | 75W-85 Manual Transmission Fluid (GM Part No. 88862472, in Canada 88862473). |
Hood Latch Assembly, Secondary Latch, Pivots, Spring Anchor, and Release Pawl | Lubriplate Lubricant Aerosol (GM Part No. 89021668, in Canada 89021674) or lubricant meeting requirements of NLGI #2, Category LB or GC-LB. |
Key Lock Cylinders, Hood and Door Hinges | Multi-Purpose Lubricant, Superlube (GM Part No. 12346241, in Canada 10953474). |
Weatherstrip Conditioning | Weatherstrip Lubricant (GM Part No. 3634770, in Canada 10953518) or Dielectric Silicone Grease (GM Part No. 12345579, in Canada 10953481). |
Maintenance Replacement Parts
Replacement parts identified below by name, part number, or specification can be obtained from your dealer.
Maintenance Replacement Parts
Maintenance Records
After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. Retain all maintenance receipts.
Engine Overheating
The vehicle has an indicator to warn of the engine overheating. See Engine Coolant
Temperature Warning Light on page 5-18.
If the decision is made not to lift the hood when this warning appears, get service
help right away. See Roadside Assistance Program on page 13-5.
If the decision is made ...
Lockout Protection
When locking is requested with the driver door open and the key in the ignition,
all the doors will lock and then the driver door will unlock. This can be manually
overridden by pressing and holding
on the power door lock switch.
If Unlocked Door Anti-Lockout is turned on, the vehicle is off ...
Checking Coolant
The vehicle must be on a level surface when checking the coolant level.
It is normal to see coolant moving in the upper coolant hose return line when
the engine is running.
Check to see if coolant is visible in the coolant surge tank. If the coolant
inside the coolant surge tank is boiling, do ...