Chevrolet Spark Owners Manual: License Plate Lamp
- Attachment Screws
- License Plate Bulb
- Bulb Socket
To replace a license plate lamp bulb:
- Remove the two screws (1) from the license plate lamp assembly.
- Turn and pull the license plate lamp assembly down.
- Turn the bulb socket (3) counterclockwise and pull it out of the lamp assembly.
- Pull the bulb (2) straight out of the socket.
- Push the new bulb into the socket.
- Install the bulb socket (3) by turning clockwise into the license plate lamp assembly.
- Replace the license plate lamp assembly by using the two screws to secure.
Replacement Bulbs
For replacement bulbs not listed here, contact your dealer.
Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
Stoplamp/Taillamp
Turn Signal Lamp/Taillamp
Back-up Lamp
To replace a taillamp, turn signal lamp, stoplamp, or back-up bulb:
Open the liftgate. See Liftgate on page 2-8.
Re ...
Other materials:
Remote Keyless Entry (RKE) System
See Radio Frequency Statement on page 13-12.
If there is a decrease in the RKE operating range:
Check the distance. The transmitter may be too far from the vehicle.
Check the location. Other vehicles or objects may be blocking the signal.
Check the transmitter's battery.
See “Battery ...
Hill and Mountain Roads
Driving on steep hills or through mountains is different than driving on flat
or rolling terrain. Tips for driving in these conditions include:
Keep the vehicle serviced and in good shape.
Check all fluid levels and brakes, tires, cooling system, and transmission.
Shift to a lower gear whe ...
When It Is Time for New Tires
Factors such as maintenance, temperatures, driving speeds, vehicle loading, and
road conditions affect the wear rate of the tires.
Treadwear indicators are one way to tell when it is time for new tires.
Treadwear indicators appear when the tires have only 1.6mm (1/16 in) or less
of tread r ...
