Chevrolet Spark Owners Manual: Infotainment
Read the following pages to become familiar with these features.
Warning
Taking your eyes off the road for too long or too often while using any infotainment feature can cause a crash. You or others could be injured or killed. Do not give extended attention to infotainment tasks while driving.
Limit your glances at the vehicle displays and focus your attention on driving. Use voice commands whenever possible.
The infotainment system has built-in features intended to help avoid distraction by disabling some functions when driving. These functions may gray out when they are unavailable. Many infotainment features are also available through the instrument cluster and steering wheel controls.
Before driving:
- Become familiar with the operation, faceplate buttons, and screen buttons.
- Set up the audio by presetting favorite stations, setting the tone, and adjusting the speakers.
- Set up phone numbers in advance so they can be called easily by pressing a single button or by using a single voice command if equipped with Bluetooth phone capability.
See Defensive Driving on page 9-2 To play the infotainment system with the ignition off, see Retained Accessory Power (RAP) on page 9-18.
Introduction
...
Theft-Deterrent Feature
The infotainment system has an electronic security system installed to prevent
theft.
The infotainment system only works in the vehicle in which it was first installed,
and cannot be used in anot ...
Other materials:
Driver Safety Belt Reminder Light
There is a driver safety belt reminder light on the instrument cluster.
When the vehicle is started, this
light flashes and a chime may come on to remind the driver to fasten their safety
belt. Then the light stays on solid until the belt is buckled.
This cycle may continue several times if th ...
License Plate Lamp
Attachment Screws
License Plate Bulb
Bulb Socket
To replace a license plate lamp bulb:
Remove the two screws (1) from the license plate lamp assembly.
Turn and pull the license plate lamp assembly down.
Turn the bulb socket (3) counterclockwise and pull it out of the lamp assem ...
Liftgate
To lock or unlock the liftgate from the outside, use the key in the liftgate
lock.
If equipped, press on the RKE transmitter
to unlock all doors and press to lock.
See Remote Keyless Entry (RKE) System Operation on page 2-3.
Without RKE
With RKE
To lock or unlock the liftgate fro ...
