Chevrolet Spark Owners Manual: Exit Lighting
If the dome lamps are in the DOOR position, they come on automatically when the key is removed from the ignition. The exterior lamps and dome lamps remain on after the door is closed for a set amount of time, then automatically turn off.
The headlamps, parking lamps, and back-up lamps will turn on for a set amount of time when the vehicle is turned off and the key is removed from the ignition, then automatically turn off.
This feature can be changed. See Vehicle Personalization on page 5-27.
Entry Lighting
The headlamps, parking lamps, taillamps, and the interior lights turn on briefly
at night when the Remote Keyless Entry (RKE) transmitter
is pressed. The lights turn off immediately
when the ign ...
Battery Power Protection
The battery saver feature is designed to protect the vehicle's battery.
If some interior lamps and/or headlamps are left on and the ignition is turned
off, the battery rundown protection system ...
Other materials:
Delayed Locking
This feature delays the locking of the doors until five seconds after all doors
are closed.
When is pressed on the power door
lock switch while the door is open, a chime will sound three times indicating delayed
locking is active.
The doors will lock automatically five seconds after all doo ...
Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
Stoplamp/Taillamp
Turn Signal Lamp/Taillamp
Back-up Lamp
To replace a taillamp, turn signal lamp, stoplamp, or back-up bulb:
Open the liftgate. See Liftgate on page 2-8.
Remove the two screws and the lamp assembly.
Turn the bulb socket counterclockwise and remove the so ...
Malfunction Indicator Lamp
A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors
the operation of the vehicle to ensure emissions are at acceptable levels, helping
to maintain a clean environment. The malfunction indicator lamp comes on when the
vehicle is placed in ON/RUN, as a check to show ...
