Chevrolet Spark Owners Manual: Electrical System

License Plate Lamp

Attachment Screws License Plate Bulb Bulb Socket To replace a license plate lamp bulb: Remove the two screws (1) from the license plate lamp assembly. Turn and pull the license pla ...

Electrical System Overload

The vehicle has fuses and circuit breakers to protect against an electrical system overload. When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the ci ...

Other materials:

If a Tire Goes Flat
This vehicle has a tire sealant and compressor kit. See Tire Sealant and Compressor Kit on page 10-56. There is no spare tire, no tire changing equipment, and no place to store a tire. It is unusual for a tire to blow out, especially if the tires are maintained properly. See Tires on page 10-3 ...

Front Turn Signal/Parking Lamps
To replace a front turn signal bulb: Open the hood. See Hood on page 10-5. Turn the bulb socket counterclockwise and pull it out of the lamp housing. Pull the bulb straight out of the bulb socket. Install the new bulb into the socket by pressing it in. Install the socket into the ...

Using the Tire Sealant and Compressor Kit to Temporarily Seal and Inflate a Punctured Tire
When using the tire sealant and compressor kit during cold temperatures, warm the kit in a heated environment for five minutes. This will help to inflate the tire faster. If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning fla ...