Chevrolet Spark Owners Manual: Delayed Locking
This feature delays the locking of the doors until five seconds after all doors are closed.
When 
is pressed on the power door
lock switch while the door is open, a chime will sound three times indicating delayed
locking is active.
The doors will lock automatically five seconds after all doors are closed. If a door is reopened before that time, the five-second timer will reset when all doors are closed again.
Press on the door lock switch again
or press on the RKE transmitter to
lock doors immediately.
This feature can also be programmed. See Vehicle Personalization on page 5-27.
Door Ajar Reminder
If one of the doors or the liftgate is not closed properly while the ignition
is on, the door ajar light on the instrument cluster comes on and stays on until
the doors are closed.
See Door Ajar ...
Automatic Door Locks
If equipped, the vehicle is programmed so that when the doors are closed, the
ignition is on, and the shift lever is moved out of P (Park) for automatic transmissions,
or the vehicle speed is abov ...
Other materials:
Dolly Towing
To tow the vehicle with the two rear wheels on the ground and the front wheels
on a dolly:
Put the front wheels on a dolly.
Shift the automatic transmission into P (Park) or a manual transmission
into 1 (First) gear.
Set the parking brake.
Clamp the steering wheel in a straight-ah ...
Recreational Vehicle Towing
Recreational vehicle towing refers to towing the vehicle behind another vehicle,
such as behind a motor home. The two most common types of recreational vehicle towing
are known as dinghy towing and dolly towing. Dinghy towing is towing the vehicle
with all four wheels on the ground. Dolly towi ...
Replacing LATCH System Parts After a Crash
Warning
A crash can damage the LATCH system in the vehicle. A damaged
LATCH system may not properly secure the child restraint, resulting in serious injury
or even death in a crash. To help make sure the LATCH system is working properly
after a crash, see your dealer to have the system inspec ...
