Chevrolet Spark manuals

Chevrolet Spark Owners Manual: Bluetooth (Overview)

If equipped with Bluetooth® capability, the system can interact with many Bluetooth phones, PDAs, or other devices to:

The device must be paired first. See “Pairing” under Bluetooth (Infotainment Controls) Bluetooth (Overview) on page 7-19 or Bluetooth (Infotainment Controls) on page 7-21.

To minimize driver distraction, before driving, and with the vehicle parked:

Warning

When using a cell phone, it can be distracting to look too long or too often at the screen of the phone or the infotainment system.

Taking your eyes off the road too long or too often could cause a crash resulting in injury or death.

Focus your attention on driving.

Vehicles with a Bluetooth system can use a Bluetooth-capable cell phone with a Hands-Free Profile to make and receive phone calls. The infotainment system is used to control the system. The system can be used while in ACC/ACCESSORY or ON/RUN. See Retained Accessory Power (RAP) on page 9-18. Not all phones support all functions and not all phones work with the Bluetooth system. See www.gm.com/bluetooth for more information about compatible phones.

There may be restrictions on using Bluetooth wireless technology in some locations.

Due to the variety of Bluetooth devices and their firmware versions, the device may respond differently when performing over Bluetooth.

Refer to the cell phone manufacturer’s user guide for questions about the phone's Bluetooth functionality.

Bluetooth Controls

For vehicles equipped with Bluetooth capability, use the buttons on the infotainment system and the steering wheel to operate the system.

Steering Wheel Controls

Chevrolet Spark. Steering Wheel Controls


SEEK or SEEK
(Next/ Previous): Press to go to the
next or previous radio station, song on an iPod, or file on a USB device (if equipped).

(Push to Talk): Press to interact
with Bluetooth or OnStar, if equipped. See Bluetooth (Overview) on page 7-19 or Bluetooth (Infotainment Controls) on page 7-21 or OnStar Overview on page 14-1.

(Mute/End Call): Press to silence
the vehicle speakers only.

Press again to turn the sound on.

Press to reject an incoming call, or end a current call.

+ or
- (Volume): Press to increase or decrease
the volume.

Audio System

When using the Bluetooth system, sound comes through the vehicle's front audio system speakers and overrides the audio system. Use the volume bar during a call to change the volume level. The adjusted volume level remains in memory for later calls. The system maintains a minimum volume level.

Phone
...

Bluetooth (Infotainment Controls)
To use infotainment controls to access the menu system, see Overview on page 7-3. Pairing A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle ...

Other materials:

California Fuel Requirements
If the vehicle is certified to meet California Emissions Standards, it is designed to operate on fuels that meet California specifications. See the underhood emission control label. If this fuel is not available in states adopting California Emissions Standards, the vehicle will operate satisf ...

Cleaning High Gloss Surfaces and Vehicle Information and Radio Displays
For vehicles with high gloss surfaces or vehicle displays, use a microfiber cloth to wipe surfaces. Before wiping the surface with the microfiber cloth, use a soft bristle brush to remove dirt that could scratch the surface. Then use the microfiber cloth by gently rubbing to clean. Never use ...

Ignition Positions
The ignition switch has four different positions. The uplevel key must be fully extended to start the vehicle. To shift out of P (Park), the ignition must be in ON/RUN and the regular brake pedal applied. 1 (STOPPING THE ENGINE/LOCK/ OFF): When the vehicle is stopped, turn the ignition sw ...

© 2016-2024 Copyright www.chevspark.net