Multi-Band Antenna
USB PortTurn and Lane-Change Signals
Move the lever all the way up or down to signal a turn.
An arrow on the instrument cluster flashes in the direction of the turn or lane
change.
Raise or lower the lever until the arrow starts to flash to signal a lane change.
Hold it there until the lane change is completed.
If the lever ...
High/Low-Beam Headlamp
Connector Retaining Tab
Connector Release
Headlamp Bulb
To replace a headlamp bulb:
Open the hood. See Hood on page 10-5.
Remove the connector retaining tab (1).
Disconnect the wiring harness connector from the bulb (3) by pressing the
connector release (2) and pulling strai ...
Hood
To open the hood:
Pull the hood release handle inside the vehicle. It is on the lower left
side of the instrument panel.
Go to the front of the vehicle and push the secondary hood release lever
up.
Lift the hood and release the hood prop from the prop retainer,
w ...